This post is more than 5 years old
47 Posts
0
1199
ViPR Controller 3.6 vApp Logon
ViPR Controller 3.6
Deployed ViPR Controller 3.6 vApp (3+2).
After deployment and before launching GUI, putty'd to one of the VMs and attempting to logon as root.
The initial password for root in the Security Guide and the Install Guide is ChangeMe
But I am getting access denied when attempting to logon as root /ChangeMe
Why?
kernelzilla
17 Posts
1
June 1st, 2017 09:00
SSH access for root is disabled by default (can be enabled via System -> General Configuration -> Security). svcuser works via SSH by default and has the same default ChangeMe password.
isakats
141 Posts
0
June 1st, 2017 08:00
Hi rmc,
The vapp default password is actually Changeme1!
regards,
Isaka
rmc_dell
47 Posts
0
June 1st, 2017 09:00
Hi Isaka,
Tried it. That being root/Changeme1!
Access denied.
isakats
141 Posts
0
June 1st, 2017 09:00
Hi rmc,
Taught this was for ViPR SRM...According to Install EMC ViPR Controller
The ChangeMe password is for the UI.
regards,
Isaka
rmc_dell
47 Posts
0
June 1st, 2017 11:00
Thank you.