Search Results (2.9K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Official Solution
Hello! I have an r740 server. And the motherboard has riser power numbers 0, 1, and 2.Here, after installing only the 1st riser kit and installing the GPU, is it possible to use both the 1st and 2nd riser auxiliary power supplies (225W each) to supply power to the GPU?I thought that if this were pos
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hi community, I'm looking for information on a sensor in the PowerEdge 650 server with iDRAC9 that monitors the voltage of the CMOS battery. I noticed a sensor called "System Board BATT PG" in the Voltage sensor type section but haven't been able to find detailed documentation about it. If anyone h
Question
•
PowerEdge Hardware General
Official Solution
good evening, could you tell me what it means that the server (t340) is in "SYSTEM ID MODE" and therefore with the blue LED flashing? Is it possible to leave it in this mode or does it create problems? What does it mean to leave it in this mode? Thank you
Question
•
PowerEdge Hardware General
Official Solution
Coming back to the admin industry after a long break and managing a more dated r540 with an iDrac running Windows Server 2016 there was a need to update the machine to latest firmware and drivers. Dell support states to use the Server Update Utility, LifeCycle Controller or individual DUPs. A
Question
•
PowerEdge Hardware General
Community Accepted Solution
Estou com um servidor Dell R710, colocamos dois ssd novos nele, porém na perc H700 ele está como bloqueado. Fiz a atualização da BIOS 6.6.0 e do Perc H700 para 12.0.1-0083
Question
•
PowerEdge Hardware General
Community Accepted Solution
just wondering if these machines will ever support this option because I see that this server officially support a nvidia tesla m40 but not sure about the 24GB version of this gpu and apparently some research says that this gpu needs this feature so it can be mapped correctly within the uefi bios, i
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
I managed to acquire a PE 1950 recently, and it doesn't work properly. When I plug in the system and fire it up, the fans run for about 10 seconds before the computer turns off and throws errors E1000 - Failsafe and E1217 - 5V PwrGd. I've tried a few things already to no avail. The person I got it f
Question
•
PowerEdge Hardware General
Official Solution
Hello, I have an error with my server, I get the following message "System Board voltage is outside of range" I have already removed memories, processor, power supplies and it doesn't work, what could be causing this error?
Question
•
PowerEdge Hardware General
Official Solution
Hi, Can anyone help me with support (latest firmware and windows 2012R2 and 2016 drivers) for this RAID controller? It seems everything about this component (PERC H310) has been removed from site. Regards!
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hello, I have an R240 2 Bay LFF Server and I want to add 2 x 2.5" SATA Drives, but the 3.5" trays are too big. Do I need to add a type of 3.5" to 2.5" Tray adapters? Can you please let me know how to make this work? I know that they're compatible.. just need them to fit. Can you please
Question
•
PowerEdge Hardware General
Official Solution
Hello, I have a T140 poweredge that is completely dead. A couple lights on the motherboard will light up, but that's it. No fans turn on, and no video, idrac button on front is not lit. Pressing the power supply test button everything seems to be fine, light turns green and all fans start spinning.
Question
•
PowerEdge Hardware General
Official Solution
Server model T430 showing error VL0204 ERROR SYSTEM ONBOARD Voltage is outside of range VL2040 ERROR CONTACT SUPPLIER
Question
•
PowerEdge Hardware General
Official Solution
Hello I have a Dell Poweredge R710 with BIOS Version 6.3.0 and I would like to upgrade it to BIOS Version 6.6.0. I do not see any ISO download on the drivers and download page to accomodate me. Is there another way I can make this happen? Also , is there any other updates that come more like
Question
•
PowerEdge Hardware General
Official Solution
I have a Dell r730xd, IDRAC8, PERC H330, PERC H730P I just developed a hardware error. The two messages are:Message 1: "A fatal error was detected on a component at bus 0 device 3 function 1"Message 2: "A bus fatal error was detected on a component at slot 5" Looking at the Hardware Inv
Question
•
PowerEdge Hardware General
Community Accepted Solution
As the title says, Would I be able to use the Icy Dock EZConvert 2.5" Hard Drive Enclosure to convert NVME M.2 SSDs into SAS to work with the current backplane? I'm aware that I may need a new RAID card in order to do this, but would the system at least boot in the meantime?
Question
•
PowerEdge Hardware General
Official Solution
Hello, I am seeking additional information on common failures observed with the R760 hardware platform. When purchasing from the Dell online store, there are a few options available: RAID/Internal Storage Controllers: Dual Controller, Front HBA 355 Rear Load Front PERC H755 Front Load
Question
•
PowerEdge Hardware General
Official Solution
I have damege MB with DP/N:0f9n89 when i search for r740 motherboard there is a lot of model is it most be same part number ?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
One of our PowerEdge R650 has a failing power supply and while clicking through the iDRAC interface, I thought it was a good idea to install the iDRAC service module. After doing it via the virtual console, I no longer get any information via SNMP (port 161) from the server, so Grafana has no data a
Question
•
PowerEdge Hardware General
Official Solution
When connecting to virtual console, I get" The session has timed out waiting for verification of the certificate.All the connections will be closed. "I tried disabling popup blockers and clearing cache...virtual console is also enabled in IDRAC settings. BIOS Version: 2.18.2Firmware Version: 2.50.5
Question
•
PowerEdge Hardware General
Official Solution
Hi all, I need urgent help. I bought PER7515 12BAY 3,5 inch server and two drives NVME 1,9TB and controller P740 ,and as I see backplane is RDRTM (google says from PER740 or XD) but that is not the issue, issue is I cannot find correct cables to connect backplane and and motherboard to see those d
Question
•
PowerEdge Hardware General