Unsolved
This post is more than 5 years old
85 Posts
0
887
Replication Manager Oracle integration with SnapClone of Mirrorview Secondary - Design Question
Hi all,
Is RM capable of creating and mounting a Oracle replica in the following environment:
Site A
CX/VNX primary
Oracle AIX prod server
Mirrorview/S between sites.
SiteB
CX/VNX secondary
Oracle AIX Test/Acceptance server with DR role
Goal is to use RM to create snapclones from the MirrorView secondary image on site B and mount them to the AIX server on site B as Test/Acceptance DB (and refresh this DB regurlarly).
In case of a disaster the Test/Acc DB will be stopped and the MV/secondary has to be promoted to primary. Can RM also assist here?
Thanks!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 4th, 2013 08:00
Are you talking about HACMP? Is the Site B Database in Standby Mode?
If yes. I believe you will need an RPQ from Replication Manager Engineering.
kernelzilla
17 Posts
0
September 4th, 2013 22:00
That configuration is supported by RM, but as Ed mentioned, if you are using HACMP you would need to do an RPQ with engineering. I would recommend checking the RM support matrix on elabnavigator for the full compatibility details. For the promotion of the secondary server, RM can assist by mounting and attaching the DB, but you would have to manually do the promotion as it only supports VNXe or Celerra environments for RM-managed promotion.