This post is more than 5 years old
53 Posts
0
2885
RPA4VMs integration with SRM 6.x
Hi Guys,
can we integrate RecoverPoint for VM with VMware SRM 6.x? any reference document.
Regards,
MAwais
This post is more than 5 years old
53 Posts
0
2885
Hi Guys,
can we integrate RecoverPoint for VM with VMware SRM 6.x? any reference document.
Regards,
MAwais
Top
Idan
675 Posts
0
October 9th, 2017 03:00
No Muhammad, SRM is incompatible with RP4VMs as SRM is working on a per LUN basis via SRAs (Storage Replication Adapters, there's one for classic RP as well) and a per VM basis only for VR.
RP4VMs has it's own orchestration engine, unrelated to SRM's one.
Hope that helps,
Idan Kentor
RecoverPoint Corporate Systems Engineering
@IdanKentor
MAwais
53 Posts
0
October 9th, 2017 09:00
thank you so much, so we can use virtual recover point appliance with SRM.
Regards,
Muhammad Awais
Idan
675 Posts
0
October 10th, 2017 02:00
Yes, vRPAs of classic RP can be used with SRM.
Classic RP vRPAs can only work with VNX/VNXe and Unity based splitters where the communication b/w the vRPAs and the array is over iSCSI (so, there should an iSCSI SLIC on the array).
Regards,
Idan
MAwais
53 Posts
0
October 10th, 2017 11:00
Thank you so much for your help, do you have vRPA with SRM reference architecture guide or any material to help me for implementation.
forshr
1.1K Posts
0
October 11th, 2017 04:00
There are some RP/SRM legacy docs on Dell EMC Online Suppport. pRPA or vRPA is irrelevant.
Regards,
Rich
MAwais
53 Posts
0
October 11th, 2017 13:00
Hi Idan,
I am reading the RecoverPoint Fundamental Doc and according to it, unity does not support vRPA(Classic).
forshr
1.1K Posts
0
October 12th, 2017 01:00
This is not the case. vRPAs are supported on all of the mid-range arrays which includes VNX, VNXe and Unity. Check out the RP with Mid-Range Array Technical Notes doc on Dell EMC Online Support.
Regards,
Rich