Unsolved
1 Rookie
•
1 Message
0
33
Missing M.2 Standoff for Precision 3640
Hi,
Does anyone know what type of M.2 stand off would fit the precision 3640 motherboard. Currently the motherboard does not have any stand offs for both M.2 slots just a screw as seen in the image below. I tried a few other stand offs but they don't fit as the size of the hole on the motherboard is too big.
I am not sure if an stand off is needed in this case as the M.2 connector is also quite low on the motherboard (height wise) so I am not sure if I should just be using that screw that came with the motherboard to attach the SSD without any stand offs.
If anyone knows what type of stand off would fit this motherboard or if it doesn't need one by design please let me know.
redxps630
9 Legend
9 Legend
•
11.5K Posts
0
June 16th, 2024 20:32
.![](https://www.dell.com/community/assets/community/687062f5-603c-4f5f-ab9d-31aa7cacb376/Untitled-51d00c2e-2f94-460f-91e1-e2d45ed0e22b-515112824.jpg)
does the pic above show a M2X2.5 Dell ssd screw (from screw list in service manual) installed in a standoff?
https://www.dell.com/community/en/conversations/precision-fixed-workstations/precision-3660-nvme-ssd-standoff-and-screw-pn/6581fca801c3da5c88f016f3?keyword=standoff
(edited)
redxps630
9 Legend
9 Legend
•
11.5K Posts
0
June 16th, 2024 23:09
the standoffs are built in the motherboard. see backside of mobo pic
https://www.ebay.com/itm/265297825438?