Unsolved
5 Posts
0
216
Dell T5810 Workstation, Avago Megaraid setup.
Hi Everyone,
I have T5810 Workstation, It came with 1TB Hard drive, I would like to upgrade the hard drive ( SAS), so I was able to purchase a 4TB SAS Hard drives .
upon adding new drive of the drive(4TB) as secondary along with the original 1TB, the Aavgo/Megaraid recognizes it but the Operating system is not able to detect it.
What configurations setup am I missing?
Any help will be appreciated.
Thanks,
Akio
mazzinia_
4 Operator
4 Operator
•
1.1K Posts
0
December 19th, 2022 14:00
Hello,
in the raid controller , you have to setup a 2nd raid 0 (single drive) and assign the 4TB to it.
Then is just matter of using Control panel > Computer management > disk management , to partition and initialize it
ahiroshi
5 Posts
0
December 20th, 2022 06:00
cannot rebuild either.
is there a BIOS setup for RAID Feature.
Thanks,
Akio
Can not setup the drive , please see the attached screenshots.
mazzinia_
4 Operator
4 Operator
•
1.1K Posts
0
December 20th, 2022 07:00
https://www.dell.com/support/kbdoc/en-eu/000147052/management-and-configuration-of-raid-arrays-on-lsi-megaraid-9361-8i-9440-9460-and-9341-raid-controllers?lwp=rt
check here
ahiroshi
5 Posts
0
December 20th, 2022 10:00
It looks like we have different Systems, the Configurations you provided are not the same.
Any help is appreciated.
ahiroshi
5 Posts
0
December 25th, 2022 11:00
Hi Everyone,
can anyone respond to this question, any help would be greatly appreciated.
Thanks,
Akio