‘perccli2 /c0 show all' failed to report the disks connected to a H965e/6Gb EMC ESES Enclosure

‘perccli2 /c0 show all' failed to report the disks connected to a H965e/6Gb EMC ESES Enclosure

But the disk number(3) is reported in 'perccli2 show'

-----------------------------------------------------------------------------------------
Ctrl Product Name       SASAddress         Personality Status  PD(s) VD(s) VNOpt EPack
-----------------------------------------------------------------------------------------
   0 PERC H965e Adapter 0X5F4EE08063F0FF00 RAID        Optimal     3     0     0 Optimal
-----------------------------------------------------------------------------------------

It works well on another 12Gb Enclosure.

this is the result when both 6Gb EMC ESES Enclosure and another 12Gb Enclosure are connected.

EID State DeviceType Slots PD Partner-EID Multipath PS Fans TSs Alms SIM ProdID           
------------------------------------------------------------------------------------------
325 OK    Enclosure     15  0 -           No         0    0   1    0   1 ESES Enclosure   
342 OK    Enclosure     15  0 -           No         0    0   1    0   1 ESES Enclosure   
432 OK    Enclosure     84 42 522         Yes        2   10  24    1   2 SP-3584-E12EBD   

so the 'Partner-EID‘/Multipath  of 6Gb EMC ESES Enclosure are wrong?

Is this a firmware issue or perccli issue ?

firmware: lastest from dell (8.4.0.0.18-27)

perccli2: lastest from dell(008.0004.0000.0022)

but perccli/H840 works well with the 6Gb EMC ESES Enclosure.

at least, we need to support this case with single path.

Best regards.