EMC-symmetrix DMX series configuration issues.

Hi Admins,

My storage is EMC-Symmetrix DMX series and my ioscan -fnkC fc and powermt gives below output in HPUNIX 11.23 server.


Class I H/W Path Driver S/W State H/W Type Description
========================================================================
fc 0 0/3/1/0/4/0 fcd CLAIMED INTERFACE HP A9784-60002 PCI/PCI-X Fibre Channel FC/GigE Combo Adapter (FC Port 1)
/dev/fcd0
fc 1 0/6/1/0/4/0 fcd CLAIMED INTERFACE HP A9784-60002 PCI/PCI-X Fibre Channel FC/GigE Combo Adapter (FC Port 1)
/dev/fcd1


Symmetrix ID=000290300315
Logical device ID=0044
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==================================================================
============
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==================================================================
============
10 0/6/1/0/4/0.2.0.0.0.1.0 c10t1d0 FA 1cA active alive 0 0
8 0/3/1/0/4/0.1.0.0.0.1.0 c8t1d0 FA 16cA active alive 0 0

As am new in storage setup can any one explain me the symmetrix arichitectue with respct to my configuration. As I have two FC card but powermt shoes only one channel is configured. Is I have any risk on this?

Thanks in advance.

Reg
Jeevaraj