Unsolved
This post is more than 5 years old
11 Posts
1
4403
My dell R710 doesn't wanna boot
Hello, My dell R710 still "died", He stays at configuring thing but i tried cold boot, warm boot...
I wil give you a gif of 25 seconds to show what he says if you guys have any idea what i can do please let me know!
http://i.imgur.com/spAEKlJ.gifv
Thanks
yoloserver
11 Posts
1
August 28th, 2016 03:00
Hello, My dell R710 still "died", He stays at configuring memory or something. sometimes i don't see that configuring memory then that is black but i see the bios F11... and i tried cold boot, warm boot...
I wil give you a gif of 25 seconds to show what he says if you guys have any idea what i can do, please let me know!
i.imgur.com/spAEKlJ.gifv
Thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
August 29th, 2016 10:00
Hello.
Let us try and bring the system to minimum to POST with the following components:
Ensure that the mouse, keyboard and other USB devices are disconnected.
yoloserver
11 Posts
1
September 1st, 2016 12:00
Cpu= 2x L5640
Disks: 6x 300GB 15k SAS raid 5
There is one usb device in it.
2 Power supply's
Idk the board i think its the normal one used on tweakers or something i have an reserve.
I have 72gb ram ddr3
Idrac and ethernet
I noticed that if i push F2 or something it goes further so it freazes till the boot.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
September 1st, 2016 12:00
Remove other things on the server and keep the following:
Remember to also remove the mouse, keyboard and other USB devices that are connected to the server and then boot the server.
Let me know of any progress.
yoloserver
11 Posts
0
September 1st, 2016 14:00
Hello, Thank you for fixing it,
Now i have another problem with my iDRAC 6 Enterprise Slow network speed (local 1gbps)
I will upload a video on my vps for you URL: Sorry if the record is bad. if you really want a record of my workstation where i open the idrac console just ask me :)
XXXX Video contains iDRAC network cfg information and hence removed by moderator for security reasons XXXX
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
September 2nd, 2016 10:00
Check your network connections and ensure that the NIC firmware and drivers are up to date
yoloserver
11 Posts
0
September 8th, 2016 11:00
Hello, that is fixed now and my vFlash is (2gb from Transcend) but he says its 512mb i saw you need a Dell sd card but they didn't sell that in the stores here ;/ is there an option for me to use the card what i bought 2gb? i need it.
Thanks.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
September 8th, 2016 12:00
Try another SD card from Kingston such as P/Ns 738M1 or JHJW9
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
September 8th, 2016 13:00
I am not really sure, but you can test and see whether all memory will disk space will be detected.
yoloserver
11 Posts
0
September 8th, 2016 13:00
Also i see this while using virtual media with an iso of 699MB (proxmox)
Thanks.
yoloserver
11 Posts
0
September 8th, 2016 13:00
Ad how about SanDisk?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
September 8th, 2016 15:00
Provide more information about the virtual media and what you were trying to do.
yoloserver
11 Posts
0
October 7th, 2016 09:00
Dear,
what will happen if i switch off the power on my dell R710 while he's running?
Specs:
2X xeon L5640
6x 15K SAS 300GB Seagate Cheetah 15K.7 ST3300657SS, 300GB
72GB ECC Ram DDR3 PC3-10600r
2x power supply 870Watt
I don't know the motherboard.
iDRAC 6 Enterprise
Raid controller perc 6/i
OS: proxmox (virtualization)
(Im using it in raid 5)
Thanks.
yoloserver
11 Posts
0
October 7th, 2016 09:00
Sorry, I didn't saw that reaction before my one, I was trying to upload an ISO to my server using virtual media.
yoloserver
11 Posts
0
October 7th, 2016 11:00
Hello,
I mean with switch off an power outage.
Thanks