This post is more than 5 years old
2 Intern
•
743 Posts
0
2446
SNMP Traps- (Windows 2012R2, OMSA 8.5)
Hi,
Using an m620 as an example, if an SNMP Trap destination is configured in the DRAC settings, why when viewing OMSA (Server Module/Alert Management/SNMP Traps) does it say:
Instructions: No SNMP trap destination is available.
Is there no correlation between OMSA and what information is in the DRAC settings?
Thx
John Bradshaw
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
April 24th, 2017 15:00
Hi,
OMSA does not import the information from the iDRAC. If you install the iDRAC service module the iDRAC can get additional information from OMSA so you may just have to use the iDRAC traps then.
bradje1
2 Intern
2 Intern
•
743 Posts
0
April 24th, 2017 16:00
Thx Josh
jamesjadams12
1 Message
1
August 9th, 2017 00:00
SNMP trap is available. You can find in this website: www.gambitcomm.com/.../