2. 4 is memory. Remove all except 1 memory module and see if it makes a difference. If not try one other memory module in same or different slot. Can't rule out motherboard problem also.
If you replaced the 2032 CMOS battery, the procedure may be the problem. To replace or reset CMOS Memory (BIOS), power off PC, disconnect AC (mains) power cord. Press power button for 10 seconds to drain any residual power. Remove battery, wait at least 5 minutesthen reinstall battery.
As previously noted, try one, known good, memory module in one slot. If still bad move that memory module to another slot. Repeat for each memory slot. If the known good memory is bad in all memory slots and clearing CMOS memory does not help it suggests a motherboard failure.
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 4th, 2021 05:00
2. 4 is memory. Remove all except 1 memory module and see if it makes a difference. If not try one other memory module in same or different slot. Can't rule out motherboard problem also.
If you replaced the 2032 CMOS battery, the procedure may be the problem. To replace or reset CMOS Memory (BIOS), power off PC, disconnect AC (mains) power cord. Press power button for 10 seconds to drain any residual power. Remove battery, wait at least 5 minutes then reinstall battery.
Johnkill
3 Posts
0
October 5th, 2021 02:00
here is the video so you can see the blinks
https://www.youtube.com/watch?v=pIqTy7HJeRM
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 5th, 2021 03:00
Johnkill
3 Posts
0
October 5th, 2021 04:00
there is no beep sir
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 5th, 2021 05:00
Sorry.
Flashing lights are basically the same.
2,4 is still memory "Memory Failure"
As previously noted, try one, known good, memory module in one slot. If still bad move that memory module to another slot. Repeat for each memory slot. If the known good memory is bad in all memory slots and clearing CMOS memory does not help it suggests a motherboard failure.