2900 Poweredge Compatibility Question

My question is, are there any issues with installing Windows Server 2012 r2 64bit clean install?

If so, what are the issues?  Do I need any drivers to load during setup in order to see my hard drive?  

I have read that Perc 5 controllers aren't supported but haven't seen anything about my configuration setup.

I have a PowerEdge 2900 specs:

311-7941 : Quad Core Xeon E5420 2nd Processor, 2x6MB Cache, 2.5GHz 1333MHz FSB,PE2900

Part Number Quantity Description

MG4341PROCESSOR, 80574K, XDH, E5420, FCLGA6

KC0381ASSEMBLY, HEATSINK, PROCESSOR, PE2900

341-5754 : Integrated SAS/SATA RAID 1 PERC 6/i Integrated/SAS6/iR

Part Number Quantity Description

NC9541ASSEMBLY, CABLE, X4, SERIAL ATTACHED SCSI, B

341-5700 : SAS6iR SAS RAID Controller

Part Number Quantity Description

YK8381PRINTED WIRING ASSY, CONTROLLER, SERIAL ATTACHED SCSI, SAS6/IR, INTEGRATED

341-3031 : 146GB 15K RPM Serial-Attach SCSI 3Gbps 3.5-in HotPlug Hard Drive

Part Number Quantity Description

TN9372HARD DRIVE, 146G, SERIAL ATTACHED SCSI, DU, 15K, 3.5, SEAGATE, 15K

FM8332LABEL, PRINT ON DEMAND, HARD DRIVE, RECTANGULAR

1213C8SCREW, 6-32X1/4", FLAT HEAD, MICROSOFT, ZINC PLATED STEEL, COUNTERSINK

D981C2ASSEMBLY, CARRIER, HARD DRIVE, SERIAL ATTACHED SCSI, UNIVERSAL, 1IN

430-0955 : Intel PRO 1000PT Single Port 1GbE NIC, PCIe

Part Number Quantity Description

U38671CARD (CIRCUIT), NETWORK, PERIPHERAL COMPONENT INTERCONNECT EXPRESS , COPPER, SING PORT

Thanks for your time and expertise.  

Brandon Dubin

Contract Network Administrator