2 Posts
0
69
BGP to VLT Peers, over Etherchannel
Hi there,
I'm planning to implement the following architecture, where a server establishes i/eBGP sessions with both VLT pairs.
As it can be seeing in the following diagram/link, Cisco supports it. However, I could NOT find any Dell documentation mentioning support for this architecture. Is this architecture supported? Is there any documentation explaining this design?
"https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/217099-ebgp-peering-over-vpc-on-nexus.html"
Stevan Alex Beluzo
2 Posts
0
January 3rd, 2024 13:59
I found the following link, which would probably answer the question, in case other people had the same doubt/concern.
https://www.dell.com/support/manuals/en-us/smartfabric-os10-emp-partner/smartfabric-os-user-guide-10-5-5/example-bgp-in-a-vlt-topology?guid=guid-9260c082-5560-4b90-a0fb-1eb04f0a6927&lang=en-us
DELL-Erman O
Moderator
Moderator
•
2.2K Posts
0
December 21st, 2023 07:48
Hi, we cannot provide Deployment and Configuration support. But I did some research and found out below articles. Please review these two documents. For more, our community can help or you can contact your local Dell newtwork support team.
Dell EMC Networking Virtualization Overlay with BGP EVPN | Dell US
BFD tracking support VRRP groups in eBGP (non-VLT Domain) | Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44 | Dell Technologies Info Hub