3 Posts
0
2996
U2720Q to S2722DC, daisy chain, MacBook
Hello,
I just received a Dell S2722DC monitor to add as a second monitor alongside a U2720Q display. The U2720Q is connected to a MacBook via USB-C. But I cannot seem to establish a connection between the newly added S2722DC to the U2720Q? I tried using the supplied USB-C to C cable and a non-Dell HDMI to HDMI cable. I am thinking to buy a DisplayPort to USB-C cable to connect it to the DisplayPort on the U2720Q and to the USB-C port on the S2722DC but I am not sure if that will work? I would appreciate any suggestions on how to get the setup to work.
Thank you
DELL-Chris M
Community Manager
Community Manager
•
55.3K Posts
0
April 4th, 2022 08:00
There is some confusion here. Neither of those monitors have the required DP out port to facilitate a MST DP daisy chain. Each monitor will need to connect to the MacBook.
U2720Q
S2722DC
mpdeboer08
3 Posts
0
April 4th, 2022 11:00
Hello Chris,
Thank you for the help. Indeed I was under the impression I could link each monitor especially if the brand is similar. Can you advise on which 27inch monitor from Dell allows MST DP daisy chain to the U2720Q? I would like to keep using the U2720Q for its resolution and fit another 27 inch screen in the configuration. I am ok leaving the S2722DC out then.
mpdeboer08
3 Posts
0
April 5th, 2022 07:00
Will either one of the following screens also fill the daisy chain feature?
- P2720D
- P2723D
- P2720DC
Thank you very much for the help in getting the setup working!
DELL-Chris M
Community Manager
Community Manager
•
55.3K Posts
0
April 5th, 2022 07:00
The U2722DE has the DP out port and USB-C video data port.