Unsolved
1 Rookie
•
1 Message
0
145
RHEL Install Fails: nothing provides kernel(blaw blaw blaw) = 0xf432dd3d needed by kmod-qlgc-qlcnic
Trying to install either RHEL 8 or 9 on a R730 but getting the same errors on either. I get a pop up saying, "The software marked for installation has the following errors. ..."
Problem 1: conflicting requests
- nothing provides kernel(__init_waitqueue_head) = 0xf432dd3d needed by kmod-qlgc-qlcnic-5.3.63-1.x86_64
There's hundreds of these listed. Do I need to configure another source to pull from?
PrecisionTux
1 Rookie
1 Rookie
•
9 Posts
0
March 9th, 2024 00:11
Make sure Secure Boot is turned off. I've seen all sorts of weird install problems crop up with Linux install when Secure Boot is turned on.
Make sure the BOIS is configured for Linux and not Winblows, if there is an OS-specific BIOS setting.