Start a Conversation

Unsolved

AS

9 Posts

20306

January 29th, 2019 12:00

E7390 SSD in WWAN port

In my Latitude E7390 I can see an empty WWAN port described **bleep** "WWAN / SSD"

Photo of the motherboard (top-left corner): 

Can I place there an additional SSD harddrive like this one SATA III M.2 2242: https://www.goodram.com/en/products/s400u-sata-iii-m-2-2242-ssd/ ?

9 Legend

 • 

12.3K Posts

January 29th, 2019 17:00

Not the one you suggested for 2 reasons. It is a SATA drive you linked to and that is a PCIe slot and that is a 2230 slot not a 2242.

From the owner's manual.

Secondary Storage:
128 GB M.2 2230 PCIeSSD
256 GB M.2 2230 PCIeSSD
 
Drives as below..2230
 

9 Posts

January 30th, 2019 04:00

Thank you!

 

So definitelly a PCIe NVMe hard drive.

 

Regarding the form factor - seller of my laptop send me email that I should buy M.2 2242 form factor drive, not 2230.

9 Legend

 • 

12.3K Posts

January 30th, 2019 09:00

OK, after further checking it appears that some retailers such as Crucial only supply SATA drives yet others such as Mrmemory state that PCIe drives are compatible. Are you confused yet...I know I am. The following posts should help. And since you have contact with the previous owner, what do they suggest as they obviously had a drive in there that was working.

https://www.dell.com/community/Latitude/Dell-Latitude-7390-profi-questions/td-p/6108441

https://superuser.com/questions/1261074/add-secondary-ssd-in-wwan-lte-m-2-slot-on-latitude-7480

https://cdn.cnetcontent.com/79/74/7974ffb8-b83d-42e5-bde5-ab183123ed32.pdf

And this from the tech specs

Primary Storage:
128 GB M.2 2280 SATA SSD
256 GB M.2 2280 SATA SSD
12
Product View and Technical
Specifications
for Latitude 7390
512 GB M.2 2280 SATA SSD
512 GB M.2 2280 SATA SED SSD
128 GB M.2 2230 PCIe SSD
256 GB M.2 2280 PCIe SSD
512 GB M.2 2280 PCIe SSD
1 TB M.2 2280 PCIe SSD
256 GB M.2 2280 PCIe SED SSD
512 GB M.2 2280 PCIe SED SS

9 Posts

January 30th, 2019 10:00

I have bought the laptop from a reseller selling regualry hundreds of refurbished dell laptops (waiting for the NBD warranty transfer to my company - then I will be able to ask Dell Support for details).

 

This company wrote to me that in the WWAN/SSD port I can mount  PCIe NVMe M.2 2242 SSD hard drive (without any specific example model, although ie. Toshiba RC100 fits these requirements.

1 Message

March 17th, 2019 12:00

Hi,

I have a Dell 7390 2 in1 and have installed BG2 M.2 2230 Toshiba 256 Gb PCIe in WWAN port and It works fine.

You will need a proper bracket to install this SSD as SSD is really small as compared to room available :-).

 I have also upgraded my primary slot with SSD7 M.2 2280 PCIe NVMe 1TB. Both SSDs are working good.

By the way, I have made Secondary drive as my system and boot drive and have observed no difference in loading software or starting windows.

Regards,

 

7 Posts

June 7th, 2019 08:00

Hey - I’m a little late getting in on this - sorry.  Where would I get the bracket to mount the SSD in the WAN port? Do you have a part #?

Thanks so much!

4 Operator

 • 

6.2K Posts

June 7th, 2019 15:00

Welcome to the Dell Community  @MWA_JeffW 

He installed an M.2 2230  30mm

If you install an M.2 2242 42mm you should not need a bracket.

Can you check your size just to make sure???

Best regards,

U2

7 Posts

June 7th, 2019 16:00

Thank you!  Is this going to work?

4 Operator

 • 

6.2K Posts

June 13th, 2019 12:00

@MWA_JeffW 

Does the BIOS see it???

Does Windows see it when you try to install the OS???

Regards,

U2

7 Posts

June 13th, 2019 12:00

Ok - I have the drive and I installed it.  I get "no bootable devices" at power up.  What am I missing?

Toshiba OCZRC100

M.2 2242 PCIe NVMe SSD

Any help, please.

4 Operator

 • 

6.2K Posts

June 13th, 2019 12:00

@MWA_JeffW 

What OS have you installed on the drive???

Regards,

U2

7 Posts

June 13th, 2019 12:00

Thanks for the response.  There is no OS.  I installed the drive in my laptop so I could install the OS.  On boot it shows no bootable devices.  The laptop does not  recognize the drive in the WAN port.

7 Posts

June 13th, 2019 13:00

No - the BIOS doesn't see it. With just that drive in it, there is an error message when the computer starts: No bootable devices. When I enter the BIOS it shows no HDDs. The BIOS version is 1.3.3

7 Posts

June 13th, 2019 17:00

I updated the BIOS to the newest version - 1.9.3.  My situation has not improved.  The system does not recognize that anything is in the WWAN slot.  Is there something I need to turn on in the BIOS or??   I'm at a standstill.

Thanks, by the way, for the help so far.

3 Apprentice

 • 

1.2K Posts

June 14th, 2019 06:00


@MWA_JeffW wrote:

I updated the BIOS to the newest version - 1.9.3.  My situation has not improved.  The system does not recognize that anything is in the WWAN slot.  Is there something I need to turn on in the BIOS or??   I'm at a standstill.

Thanks, by the way, for the help so far.


@MWA_JeffW as previous posters in the thread have suggested, the slot will only accept the 2230 style drive with an additional bracket. The drive you have purchased, the 2242, doesn't work with that slot hence why it is not being detected.

As per JOceans post

Not the one you suggested for 2 reasons. It is a SATA drive you linked to and that is a PCIe slot and that is a 2230 slot not a 2242.

From the owner's manual.

Secondary Storage:
128 GB M.2 2230 PCIeSSD
256 GB M.2 2230 PCIeSSD
 
Also confirmed as working by ProcessSoft

Hi,

I have a Dell 7390 2 in1 and have installed BG2 M.2 2230 Toshiba 256 Gb PCIe in WWAN port and It works fine.

You will need a proper bracket to install this SSD as SSD is really small as compared to room available :-).

 I have also upgraded my primary slot with SSD7 M.2 2280 PCIe NVMe 1TB. Both SSDs are working good.

By the way, I have made Secondary drive as my system and boot drive and have observed no difference in loading software or starting windows.

Regards,

Alan
No Events found!

Top