Unsolved
This post is more than 5 years old
2 Posts
0
6303
December 30th, 2017 17:00
Bios update
Plz help me plz.plz .I have update my bios to 1.4. 1 in dell inspiron 5559 laptop.laptop . after the updating I can't login to windows. I try many more times.times . error msg accrue with blue screen. And it contain several error msg in several times. One msg is fault in nonpad area. I try to reinstall windows 10. But I can't do it that msg accrue again.again . I try many times to install windows and finally I did it.it . 1 time I logged to my laptop after reinstall windows.windows . but after next boot up that error msg accrue again.again . plz help me soon.soon . plz. I have no money to fix it. That laptop gave my aunty to my study.study . plz help
LSUFAN51
4 Operator
4 Operator
•
6.4K Posts
1
January 1st, 2018 12:00
:emotion-2:
Please run the diagnostic tool to check the hardware on system by following steps below:
1. Power off system. Remove all peripherals ( except AC adapter).
2. Power on system, quickly start tapping the F12 key continuously until you see Preparing one time boot menu in the top right corner of the screen. In boot menu, select Diagnostic. After quick tests finish, select Hard Drive, and Thorough Test Mode. After Hard drive test completed, select Memory, and Thorough Test Mode. Report back any error code.
ePSA Pre-boot System Assessment (Official Dell Tech ...
LSUFAN51
4 Operator
4 Operator
•
6.4K Posts
0
January 1st, 2018 12:00
In the meantime:
PAGE FAULT IN NON PAGED AREA
LSUFAN51
4 Operator
4 Operator
•
6.4K Posts
0
January 2nd, 2018 09:00
Any update chamara.thennakoon ?
khalidsbaih
16 Posts
0
January 2nd, 2018 10:00
In another forum someone found BIOS downgrade method for BIOS 1.4.0 versions. I'm telling you step by step;
*First you shut down the computer completely.
*Then, while the computer is turned off, hold down the left Ctrl + Esc keys and connect the charging cable to the computer. The computer will start up automatically.
*We continue to hold down Ctrl + Esc until the BIOS Recovery window appears.
*After the BIOS Recovery window arrives, select "Rollback" and continue, the BIOS will be downgraded after the computer restarts itself.
*After this, you can now install BIOS 1.1.0. Now your automatic shutdown problem will be resolved.