Unsolved
This post is more than 5 years old
10 Posts
0
4562
Unable to add devices to RDF group
below is the error I am getting when adding a BCV+R1 device to a SRDF group.How can I bypass this issue.
symld -g RDFG1 add dev 1448
"Cannot add the device to the device group because it is a BCV device"
grep 1448 symrdf_list.txt
1448 02D7 B-R1:1 RW RW NR S.. 0 58 RW RW Split
thanks
Jayan
symld -g RDFG1 add dev 1448
"Cannot add the device to the device group because it is a BCV device"
grep 1448 symrdf_list.txt
1448 02D7 B-R1:1 RW RW NR S.. 0 58 RW RW Split
thanks
Jayan
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
February 4th, 2009 10:00
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
February 4th, 2009 16:00
symdg show RDFG1
ThX!
Jayan3
10 Posts
0
February 4th, 2009 23:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
February 5th, 2009 01:00
symbcv -g group_name add dev 0BAD -sid 123
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
February 5th, 2009 02:00
You deserve a green star :-D
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 5th, 2009 03:00
DineshP1
1 Message
0
December 9th, 2016 02:00
I have faced the same issue. I was working on pre-work to migrate SYMDEV 77AD (R1) to target VMAX using SRDF.
But I was NOT able to add SYMDEV 77AD to DG . It was failing with below error:
"Cannot add the device to device group because it is a BCV Device".
When I checked device configuration I found "RDF1-BCV+TDEV". As device group was RDF1 type and device was RDF1-BCV so I thought of Migrating it using file rather than Device Group.
Work around : create a temp file Pair.Txt and run symrdf commands on that file rather than on Device group.
################
Pair.txt
#R1 R2
77AD 00EF
################
symrdf -rdfg 135 -f /home/puny/Pair.txt -sid 1950 query
symrdf -rdfg 135 -f /home/puny/Pair.txt -sid 1950 establish -full