Host Systems
Posts
This post is more than 5 years old
Solved!
Go to Solution2 Posts
0
685
March 21st, 2008 07:00
Open Replicator
How do I mask a clariion lun to dmx for open replicator
Responses(3)
8
0
3
14
0
9
12
0
8
16
0
1
13
0
1
No Events found!
This post is more than 5 years old
2 Posts
0
685
Top
bodnarg
385 Posts
0
March 21st, 2008 10:00
1) You need to manually create/register (including typing in the WWN) by hitting the "New" button under "Connectivity Status" screen. All default settings. You will need one record for each pairing (if one HBA sees 2 SPs you need to create 2 records selecting the "SP-Port" drop down.
2) You need to select the "Show Storage System Initiators" to see these new registered WWNs (excludes them by default)
3) Make sure you have the DMX FA and Clariion SP ports zoned to each other.
4) Add the DMX to the Storage Group with the LUNs you are migrating OR create a new Storage Group with the DMX and move the LUNs when you are ready to migrate.
The quirk is you will not see the DMX-4 WWNs show as "Logged In" until the OR session is established.
Hope this helps - it is not too bad.
xe2sdc
2.8K Posts
0
March 21st, 2008 08:00
Message was edited by:
Stefano Del Corno
hnb1
2 Posts
0
March 21st, 2008 11:00