This post is more than 5 years old
64 Posts
0
6874
XPS Studio 435MT PSU upgrade
I need to replace my current PSU on a Dell XPS Studio 435MT.
Will the Silencer MK III 500w fit this system? I am upgrading the video card
and adding a 3rd HD. Another question is (since this 435 is a
Mini-tower) will it overheat with this unit installed?
Thanks,
Neal
nkqx57a
64 Posts
1
December 8th, 2011 08:00
I installed the Silencer Mark III 500w in the 435mt (was not easy...had to remove memory sticks, two HDs to get the old one out and replace it with the Mark III). The 435mt does not have much working space inside, very tight fit. Now just hope the Mark III does not overheat the system. Really like the modular design, but the cabling is all over the place. Cramed it in, but again it was not easy.
DELL-Chris M
Community Manager
Community Manager
•
55.1K Posts
0
November 24th, 2011 13:00
If it is the standard size, it should be fine. Other 435MT users were successful with this 650w power supply upgrade.
nkqx57a
64 Posts
0
November 27th, 2011 14:00
Thanks Chris, Here are the specifications: Will it fit? Will it overheat my system?
Physical
Wattages
400W, 500W, 600W
Internal Components
100% Japanese low ESR 105°C capacitors
Compatibility
ATX12V v2.3 standard
Rails
Single +12V
Connector Type
Modular
Fan Type
120mm double ball-bearing, load and temperature controlled
Efficiency
80-Plus Bronze Certified, 85% Efficiency at Typical Load
Power Usage
ErP compliant for low power usage in standby mode
Dimensions (W x L x H)
150mm x 86mm x 160mm
Weight
2.20kg
Safety Approvals
UL, CUL, CE, CB, FCC Class B, TÜV, CCC, C-tick
MTBF
100,000 hours
Warranty
5-Years