This post is more than 5 years old
3 Posts
0
24086
Dell 8300 with DH67M01 Motherboard front panel power connectors
I upgraded from my Dell 8300 at work. It has an I% processor so the idea was to give it to my son. He wanted to keep his case, so I thought no big deal. Now I am ready to toss it all out.
I cannot find a schematic for the front panel cables anywhere (motherboard DH67M01). I need to hook up Power LED, Power Switch, and HDD LED (there is no reset button).
I only hope I have done it wrong, because now the computer will not boot (black screen with blinking cursor).
speedstep
9 Legend
9 Legend
•
47K Posts
1
June 20th, 2017 05:00
Rohe posted a pic. Dell doesn't ever provide this information.
Dan-H
1.2K Posts
0
June 19th, 2017 22:00
Here are a couple of threads that might help you.
en.community.dell.com/.../19629462
en.community.dell.com/.../19586001
You might also check that all the power connectors to the MoBo are properly seated.
Don't give up...
speedstep
9 Legend
9 Legend
•
47K Posts
0
June 20th, 2017 10:00
There is no such DELL Motherboard part number.
There are 2 Dimension 8300's
The XPS 8300 and the ancient Dimension 8300.
XPS 8300
Dimension 8300
Zukowski
3 Posts
0
June 20th, 2017 11:00
That is what is printed on the board, and I found reference to it around the web. www.findlaptopdriver.com/.../ . However, you are correct that Dell does not seem to recognize it.
Zukowski
3 Posts
0
June 20th, 2017 11:00
Thank you very much SpeedStep! So simple when you have the picture. My blackscreen problem ended up a corrupted Windows file. Now I have everything installed, and the power supply is too small, fortunately, that is an easy fix.
RoHe
10 Elder
10 Elder
•
44.1K Posts
0
June 20th, 2017 16:00
For the record, I didn't post the pin-out diagram in that thread. rdunnill posted the diagram and deserves the credit. :emotion-5:
rdunnill
6 Professor
6 Professor
•
8.8K Posts
0
June 20th, 2017 22:00
I installed an XPS 8500 motherboard, similar to the XPS 8300, in an aftermarket case. It works well.