This post is more than 5 years old
2 Intern
•
743 Posts
0
1394
Monitoring Dell MD3460 Storage Array controller
Hi,
Regarding the steps for monitoring Dell MD3460 Storage Array controllers ......
After adding the IP addresses under Discovery Ranges, then Selecting the PowerVault MD Array as well as SNMP as the device type, OME still will not identify the PowerVault correctly but leaves it as Unclassified.
Are there any other required Protocols to enable for this device discovery from the list below?
Any specific ports that need opening on Firewalls?
Thx very much,
John Bradshaw
DELL-Shivendra K
2 Intern
2 Intern
•
685 Posts
1
September 25th, 2017 21:00
Hi John,
Discovery options are correct. No need to add any other protocol.
Additionally, ensure port 2463 is allowed from OME to the managed node in the firewall settings.
bradje1
2 Intern
2 Intern
•
743 Posts
0
September 26th, 2017 00:00
Thx Shivendra. Nice to know.
JB