This post is more than 5 years old
32 Posts
0
10003
data domain high availability
hi all..
we have the first installation of a dd 9300 ha
since we don-t have any experience we need info like >
how many ip we needs or ask to customer to provide ?
cable configuration ?
how does it works ha in data domain ?
how to configure it ?
starting from what code we can configure it ? or what code ddos do you suggest ?
many thanks
regards
Giacomo cester
No Events found!
DELL-Sam L
Moderator
Moderator
•
7.2K Posts
0
November 20th, 2018 13:00
Hello Giacomo cester,
Here is the install guide for your DD9300 that has what is needed for the install. https://www.emc.com/collateral/TechnicalDocument/docu79598.pdf
Please let us know if you have any other questions.
jeka1
32 Posts
0
November 27th, 2018 01:00
many thanks ! we have to do only basic config just management ip and create ha cluster , and than professional will do implementation so your info is enough , many thanks again
giacomo cester
Niamun
1 Rookie
1 Rookie
•
10 Posts
0
May 14th, 2019 10:00
Hi,
while i execute the cmd: ha create peer found the error volume is not online
if you could please help me!
g.lai
4 Posts
0
November 24th, 2019 07:00
I do have the same problem.
Last night, I was ordered to turn DD6800 single node to DD6800 HA.
after the command : ha create peer
...
volume(s) are not online.
Any expert could help?
g.lai
4 Posts
1
December 8th, 2019 18:00
After a long discussion with support and a solid practical experience, we solved the problem.
The procedure generated by SolveDesktop might missing somethings.
after disable the file system in primary node. we should
#storage remove disks ' to remove the SSDs one by one.
then, follow the procedures in SolveDesktop.