This post is more than 5 years old
165 Posts
0
1322
Question to change IPaddres in Brocade 48000
Hi
Does any one know how to change Ip address in a Brocade switch 48000, I have local Ip's in my switch, but I need to change them to public Ips by using the ippaddrset command, the problem here I dont know how to use this command,
I have this output:
CHASSIS
Ethernet IP Address: 10.1.1.10
Ethernet Subnetmask: 255.0.0.0
CP0
Ethernet IP Address: 10.1.1.11
Ethernet Subnetmask: 255.0.0.0
Host Name: cp0
Gateway IP Address: none
CP1
Ethernet IP Address: 10.1.1.12
Ethernet Subnetmask: 255.0.0.0
Host Name: cp1
Gateway IP Address: none
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
And I need to change them to 174.x.x.x network
could you help me please?
another question do i need 3 Ip's to do that?
Best regards
Does any one know how to change Ip address in a Brocade switch 48000, I have local Ip's in my switch, but I need to change them to public Ips by using the ippaddrset command, the problem here I dont know how to use this command,
I have this output:
CHASSIS
Ethernet IP Address: 10.1.1.10
Ethernet Subnetmask: 255.0.0.0
CP0
Ethernet IP Address: 10.1.1.11
Ethernet Subnetmask: 255.0.0.0
Host Name: cp0
Gateway IP Address: none
CP1
Ethernet IP Address: 10.1.1.12
Ethernet Subnetmask: 255.0.0.0
Host Name: cp1
Gateway IP Address: none
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
And I need to change them to 174.x.x.x network
could you help me please?
another question do i need 3 Ip's to do that?
Best regards
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
October 1st, 2009 19:00
guanabacoa
165 Posts
0
October 5th, 2009 08:00
do i need to do something else? i mean I need to change the 3 IP's CHASSIS, CP0 CP1, Do i need to specify each module(Chassis, CP0, CP1) or automatically ipaddrset is going to ask me for each?
Do i need to reboot the Switch?
Regards
Allen Ward
2.1K Posts
0
October 6th, 2009 07:00