Unsolved
1 Rookie
•
1 Message
0
16
Errors on DELL N1548P switch
Hello everyone, I have problems with a DELL Powerconnect N1548P switch, this device works as an access switch, the errors it shows are:
Received sbus ack with SER_CHECK_FAIL set.
FP_TCAM.ipipe0 failed(ERR)
Can you guide me to know what this problem refers to?
The switch still has a valid warranty
DELL-Sam L
Moderator
Moderator
•
7K Posts
0
August 9th, 2024 09:01
Hello PedroSilvaE,
What is your current firmware version on your N1548p? If you reboot the switch, are you still receiving the error?
routerswitchinfo
3 Posts
0
August 19th, 2024 12:41
The errors you're encountering on your DELL Powerconnect N1548P switch, such as "Received sbus ack with SER_CHECK_FAIL set" and "FP_TCAM.ipipe0 failed(ERR)," typically point to hardware issues related to the forwarding plane or TCAM, which are essential for the switch’s operations. Since your switch is still under warranty, it's advisable to contact Dell Support for a proper diagnosis and potential hardware replacement. If you're looking for a quick replacement or an alternative, you might consider checking out buyrouterswitch.com for competitive pricing and reliable service on networking equipment.