This post is more than 5 years old
31 Posts
0
620
End to end connectivity tool strange behavior
Hello,
I have several Clariion connected to a MDS 9509 running SANOS 3.3.1c.
From Fabric Manager I ran the end to end connectivity tool against a zone-set.
After the tool ran, I received several warning from my Clariion regarding initiators logged in but not registered.
I checked and noticed that the WWN were the one utilized by the MDS to issue fcping.
But I'm wondering why these initiators are still logged in my Clariion?
Someone can tell my how to disconnect these initiators ?
Many thanks
Eric
I have several Clariion connected to a MDS 9509 running SANOS 3.3.1c.
From Fabric Manager I ran the end to end connectivity tool against a zone-set.
After the tool ran, I received several warning from my Clariion regarding initiators logged in but not registered.
I checked and noticed that the WWN were the one utilized by the MDS to issue fcping.
But I'm wondering why these initiators are still logged in my Clariion?
Someone can tell my how to disconnect these initiators ?
Many thanks
Eric
healyj
141 Posts
0
November 28th, 2017 07:00
Hi there,
In our effort s to clean up the forum, we came across your question / statement.
If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered.
As for now we set it to “answered.”
Regards,
Jim
AranH1
2.2K Posts
0
May 15th, 2009 08:00
The button will be greyed out for hosts that are logged in and registered so you should only be able to deregister hosts that are not registered with the array.
hersh1
197 Posts
0
May 18th, 2009 07:00