Unsolved
This post is more than 5 years old
5 Posts
0
1213
Drive not initialized Windows Server 2008 r2
Hello!
I have problem with AX4-5. We connect ISCSI Navisphere with Server Windows 2008 ant it connected. But we at initialization comes out error Drive not initialized. I know it's problem with with windows server 2003, but we have Server 2008.
kelleg
4.5K Posts
0
April 10th, 2017 13:00
It may be the way you have the Windows 2008 setup for pathing. What failover software are you running on the server? Also, see KB 463477 for information about EMC arrays and the use of iSCSI - this lists all the KB's relevant for iSCSI. Also see KB 468345 - this talks about Windows servers and iSCSI. There is a sub-heading just for Windows in 463477 - check in there also for MPIO and iSCSI.
glen
Eroman1
5 Posts
0
April 11th, 2017 12:00
Thank you. But, before ax4-5 was connected our windows server worked and was no problem. Maybe problem with some hard disk. Could this be?
We used for connect ISCSI initiator. And there's an error event with Second Processor.
kelleg
4.5K Posts
0
April 11th, 2017 13:00
If you're seeing errors on the AX4, you'll need to get those fixed - it may be stopping you from connecting somehow. But even with one SP, you should be able to at least make a connection from the Windows host to the AX4 port.
glen