This post is more than 5 years old
2 Intern
•
222 Posts
0
478
Clariion SANCopy question
We have 2 CX4 arrays. One array has the SanCopy software running, the other does not.
Can I still use SanCopy to source a lun from the array with sancopy to a target lun on the array which does not have the software?
PS, im going to try and setup iSCSI to connect the arrays together since they are in different locations.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 25th, 2014 11:00
yes, you can "push" to an array that does not have SANCopy enabler installed.
usao
2 Intern
2 Intern
•
222 Posts
0
November 25th, 2014 11:00
Excellent, that's just what we need.
Now all I have to do is figure out how to get the arrays to talk via iSCSI...
kelleg
4.5K Posts
0
November 25th, 2014 14:00
Make sure that the two arrays are in the same Domain - for San Copy the two arrays needs to talk over the SP Management Ports.
glen
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 25th, 2014 14:00
while that makes things easier for GUI people like you Glen
, they don't have to be in the same domain. naviseccli will work just fine as long as they are zoned/registered properly.