DELL Precision T3600 UEFI Boot issue

Hi @phecko,

Make sure that you connect the USB stick onto a general USB 2.0 port but not 3.0.

If you confirm USB stick connect to the right port but still can't boot, try downgrade to A13 or below. If it works this way, I'll further tell you the trick ^^

Hi @bmcowboy

thanks for the heads up - downgrade to A13 realy? After this shoud I do a upgrade to A17 again?

Maybe you can tell me the trick? :-)

cheers,

Piet

Try first. The problem you're facing now may or may not related to BIOS version. But if A13 really works, DO NOT upgrade back to A17. I'll tell you the trick then.

Hi @bmcowboy,

so I am back on A13 (https://downloads.dell.com/FOLDER02190235M/1/T3600A13.exe)

Nothing changed - still no UEFI USB Boot device - just Lagacy Mode Boot.

So maybe you little secrect will be the solution?

Cheers,

Piet

Then, you may have to add the UEFI boot device manually.

Reference to this thread, same symptom as yours.

It was a long story.

My T5600 suffer from more or less the same problem as yours before. Sometimes UEFI boot device no show, and cannot even add manually. Sometimes USB boot device detected but cannot boot (only a black screen) no matter by BIOS or UEFI mode. Really ignoring...

Until last Saturday I tried all possible BIOS version from A05 to A18, then finally located a change on A14  not only affect read request size on PCIe but also lead to USB boot problem as well. Details in this thread. After flash back to A13, everything's fine now.

Then I noticed to your post and checked that BIOS A14 for T3600 contains exactly the same enhancements. That's why I recommended a BIOS downgrade for you at the very beginning. 

Also I suggest you to update your t3600 bios from a15 or a17 to the latest version a18  thanks

Hello!

Click on add boot option a windows will open plug in the usb first before clicking add a boot option then in the new windows bios will automatically detect any boot device there are 3 blanks you just have to enter the name of usb like company and storage e.g Kingston 16GB in the first blank after that the second blank if already filled dont need to change or do anything in the second blank leave the third blank empty and save that and exit then your pc will reboot and automatically detect any boot device and run it by itself

Thanks

UEFI and Legacy MBR are not compatible.

I would like to resurrect this topic. I am having a similar issue, I have eight T3600 towers and none of them have UEFI boot options. I need to PXE boot to load images on them and am having a hard time figuring out how to add efi network servicing stack option. The UEFI boot sequence is selected (it has an empty boot option)  and advanced boot options section is not visible in the list of options in BIOS. Id prefer not to PXE boot in legacy.

Thanks,

Joe.