Recommendations for your PC fleet
SupportAssist enables you to review the recommendations for the PCs and act on them to keep your PCs running at their best. These recommendations are displayed based on scheduled scans or the latest telemetry data that is collected from the PCs. You can view or perform optimizations based on the roles and permissions configured by the administrator. See
角色和權限.
To optimize the PCs, from the
TechDirect dashboard, go to
and select the site and groups from the
Sites & groups list.
註:You can view recommendations for all PCs that are under warranty. However, remote optimizations are exclusively available for PCs with an active ProSupport Plus or ProSupport Flex for Client service plan. Additionally, regardless of the PC service plan or warranty status, you can remotely update BIOS, drivers, firmware, and applications for all PCs.
註:If you have enabled Automatic Software Optimization for PCs in SupportAssist configuration, recommendations are not displayed for PCs with an active
ProSupport Plus or
ProSupport Flex for Client service plan using that configuration. Optimizations for such PCs are automatically performed during scheduled scans.
If there are any actionable recommendations available for your fleet of PCs, a quick view of PC recommendations is displayed on the
Overview page. Click the corresponding link to remotely optimize the PC fleet. When the PCs are online and connected to Dell, they check for pending tasks. Depending on the group configuration, the tasks are performed on the PCs. If the tasks are not executed within 30 days, they time out and you can initiate the tasks again.
註:The scan notifications are not displayed on the user PC if:
- The
Display notifications option is disabled in the SupportAssist configuration.
- The PC is in presentation mode.
- The notifications in the Windows action center are disabled.
- There was no activity on the PC for 15 minutes.
- The PC is locked or signed out.
註:For larger fleets with numerous recommendations, it is advisable to perform up to 50,000 updates at once.
The following table describes the details of recommendation types that are displayed on the
Recommendations page:
表 1. Recommendations for your Dell PC fleetThe following table describes the details of recommendation types that are displayed on the
Recommendations for your Dell PC fleet page:
Tile
|
Type of Recommendation
|
Action
|
Check for updates
註:Recommendations are not displayed if you are managing PC updates using custom catalogs. You can change this preference in the
Set PC update source page. See
Set PC update source.
|
Indicates the number of updates available for your PC fleet. You can filter for security, critical, recommended, and optional updates.
- Critical—updates that are necessary to ensure that the PCs are healthy.
- Recommended—updates that improve the performance of your PCs.
- Optional—updates that you can choose to install on your PCs.
|
To review the updates available, click
View updates. To update the drivers, perform the following steps:
- Click
View PCs.
- Select the PCs on which you want to update the drivers.
- Click
Update.
註:You may have to restart the PC to complete the installation of certain drivers.
註:You cannot install updates on PCs when using a Remote Desktop Protocol (RDP) connection.
|
Scan Hardware
|
Indicates the number of PCs that have not been scanned in
x number of days, where
x denotes 30 days, 60 days, or 90 days.
|
To scan the PC hardware, perform the following steps:
- Click
View PCs.
- Select the PCs on which you want to run the scan.
- Click
Run.
|
Boost performance
註:For PCs running
商務電腦專用的 SupportAssist version 3.6 or earlier, the
Clean files and
Tune performance optimizations are displayed instead of
Boost performance.
|
Indicates the disk space that is cleanable across PCs. This data is available for 30 days, 60 days, or 90 days. Indicates the number of PCs that have not been tuned for performance in
x number of days, where
x denotes 30 days, 60 days, or 90 days.
|
To boost performance, perform the following steps:
- Click
View PCs.
- Select the PCs on which you want to clean the disk space.
- Click
Run.
|
Optimize network
|
Indicates the number of PCs that have not been optimized for network settings in
x number of days, where
x denotes 30 days, 60 days, or 90 days.
|
To optimize the network connectivity, perform the following steps:
- Click
View PCs.
- Select the PCs on which you want to optimize the network connectivity.
- Click
Run.
|
Remove viruses & malware
註:The virus and malware removal feature is not available in certain regions, for example, China.
|
Indicates the number of unwanted programs available on PCs. You can also filter and view the count of viruses, malware, and Potentially Unwanted Programs (PUPs).
|
To remove viruses, malware, or PUPs, perform the following steps:
- Click
View PCs.
- Select the PCs from which you want to remove viruses, malware, or PUPs.
- Click
Remove.
註:When you select a PUP for removal, all the associated references are deleted.
|
The
Current progress section displays the optimizations that are in progress.
註:To cancel the update, select
Queued from the
Status list, select the updates that you want to cancel, and then click
Cancel. You cannot cancel updates that are in progress.