The
PowerEdgeT560system is a 2-socket 4.5U tower server that supports:
Up to two 4
th Generation Intel® Xeon® Scalable Processors with up to 32 cores
Up to two 5
th Generation Intel® Xeon® Scalable Processors with up to 28 cores
16 RDIMM slots
Two redundant AC or DC power supply units
Up to 12 x 3.5-inch SAS/SATA HDD drives
Up to
8 x 3.5-inch SAS/SATA HDD drives
Up to
8 x 3.5-inch SAS/ SATA HDD + 8 x 2.5-inch NVMe SSD drives
Up to
8 x 2.5-inch SAS/SATA HDD drives
Up to
16 x 2.5-inch SAS/SATA HDD drives
Up to
24 x 2.5-inch SAS/SATA HDD drives
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the
Dell Express Flash NVMe PCIe SSD User's Guide at
Dell Support page > Browse all Products > Data Center Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation
> Manuals and Documents.
NOTE:All instances of SAS, SATA, and NVMe drives are referred to as drives in this document, unless specified otherwise.
CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the system warranty.