Dell PowerEdge R7515 Installation and Service Manual

Removing a memory module

Prerequisites

Follow the safety guidelines listed in the Safety instructions.
Follow the procedure listed in the Before working inside your system.
Remove the air shroud.

NOTE:The memory modules are hot to touch for some time after the system has been powered down. Allow the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or metallic contacts on the memory module.

Steps

Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory module or metallic contacts.
To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module socket.
Lift the memory module away from the system.
Figure 1. Removing a memory module

Next steps

Replace the memory module.

歡迎

歡迎來到 Dell

Dell PowerEdge R7515 Installation and Service Manual

Removing a memory module

Prerequisites

Steps

Next steps

對此內容評分