跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge R760 Installation and Service Manual

PDF

Installing the M.2 NVMe SSD module

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions.
  2. Follow the procedure listed in the Before working inside your system.

Steps

  1. Align the M.2 NVMe SSD module at an angle with the BOSS-N1 card connector.
  2. Insert the M.2 NVMe SSD module until it is firmly seated in the BOSS-N1 card connector.
  3. Using the Phillips #1 screwdriver, secure the M.2 NVMe SSD module on the BOSS-N1 card with the M3 x 0.5 x 4.5 mm screw.
    Figure 1. Installing the M.2 NVMe SSD module
    This image shows how to install the M.2 NVMe SSD module.
  4. Slide the BOSS-N1 card carrier into the BOSS-N1 module slot.
  5. Close the BOSS-N1 card carrier release latch to lock the carrier in place.
    Figure 2. Installing the BOSS-N1 card carrier
    Installing the BOSS-N1 card carrier

Next steps

  1. Follow the procedure listed in the After working inside your system.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\