跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單

Dell PowerEdge R760 Installation and Service Manual

Installing the left control panel

Steps

  1. Align and slide the left control panel in the slot on the system.
  2. Route the left control panel cable through the side wall of the system.
  3. Align and slide the left control panel cable cover in the slot on the system.
    NOTE:Route the cable properly to prevent the cable from being pinched or crimped.
  4. Connect the left control panel cable to the connector on the system board .
  5. Using the Phillips #1 screwdriver, tighten the screws to secure the left control panel and the cable cover to the system.
    NOTE:The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
    Figure 1. Installing the left control panel
    This image shows Installing the left control panel.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎?
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助?請選擇。
  評語中不得包含下列特殊字元:<>()\