Integrated Dell Remote Access Controller 9 RACADM CLI Guide

Verifies if the destination IPv6 address is reachable from iDRAC or with the current routing-table contents. A destination IPv6 address is required. Based on the current routing-table contents, an ICMP echo packet is sent to the destination IPv6 address.

To run this subcommand, you must have Debug privilege.

racadm ping6 <ipv6address>

Pinging 2011:de11:bdc:194::31 from 2011:de11:bdc:194::101 with 32 bytes of data:
Reply from 2011:de11:bdc:194::31: time<1ms 
Reply from 2011:de11:bdc:194::31: time<1ms 
Reply from 2011:de11:bdc:194::31: time<1ms 
Reply from 2011:de11:bdc:194::31: time<1ms 

Ping statistics for 2011:de11:bdc:194::31:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms