Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

ping

Description	Verifies if the destination IP address is reachable from iDRAC with the current routing-table contents. A destination IP address is required. Based on the current routing-table contents, an ICMP echo packet is sent to the destination IP address. To run this subcommand, you must have the Debug privilege.
Synopsis	racadm ping <ipaddress>
Input	`<ipaddress>` — The IP address of the remote endpoint to ping.
Output	PING 10.94.161.161 (10.94.161.161): 56 data bytes64 bytes from 10.94.161.161: seq=0 ttl=64 time=4.121 ms 10.94.161.161 ping statistics 1 packets transmitted, 1 packets received, 0 percent packet lossround-trip min/avg/max = 4.121/4.121/4.121 ms