Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

FCD8500

Message: Unable to apply the arg1 configuration. The affected servers (slot arg2 ) are not turned off.
Arguments: arg1 = configuration name, arg2 = slot number
Detailed Description: The server specified in the message must be turned off or the server slot must be empty before changing the FlexAddress configuration.
Recommended Response Action: Turn off the server and retry the operation.
Category: Audit (FCD = Feature Card)
Severity: Severity 2 (Warning)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*
CMC	✔*						✔*

Message: The feature is deactivated: arg1 .
Arguments: arg1 = feature name
Detailed Description: The FlexAddress, FlexAddress+ or extended storage feature is deactivated. Turn chassis off and remove the feature card.
Recommended Response Action: Turn chassis off and remove the feature card.
Category: Audit (FCD = Feature Card)
Severity: Severity 1 (Critical)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*
CMC	✔*						✔*

Message: The feature is activated in the chassis: arg1
Arguments: arg1 = feature name
Detailed Description: Chassis already has the feature identified in the message activated. Only one instance of a feature can be activated at a time. If the feature must be activated on the new card, it must be deactivated before activating.
Recommended Response Action: No response action is required
Category: Audit (FCD = Feature Card)
Severity: Severity 3 (Informational)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*
CMC	✔*						✔*

Message: The feature was previously activated on another chassis.
Detailed Description: The card was installed and activated on another chassis. To use this card, it must be deactivated (uninstalled) on the other chassis.
Recommended Response Action: Remove the card and install it on the chassis where the feature is activated.
Category: Audit (FCD = Feature Card)
Severity: Severity 3 (Informational)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*
CMC	✔*						✔*

Message: The features cannot be deactivated when the chassis is turned on.
Detailed Description: Features cannot be deactivated when the chassis is turned on.
Recommended Response Action: Turn off the chassis via the Web interface or RACADM command line interface before deactivating the feature. To turn off the chassis using Racadm type "racadm chassisaction -m chassis powerdown". To deactivate the feature using RACADM, type "racadm <feature> -d" where <feature> is the name of the feature to be deactivated.
Category: Audit (FCD = Feature Card)
Severity: Severity 2 (Warning)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*
CMC	✔*						✔*

Message: Unable to activate the arg1 . The chassis service tag is unavailable.
Arguments: arg1 = feature name
Detailed Description: The CMC is not responding. The chassis has the factory-programmed service tag.
Recommended Response Action: Contact your service provider.
Category: Audit (FCD = Feature Card)
Severity: Severity 1 (Critical)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*
CMC	✔*						✔*