跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PDF

AMP Event Messages

AMP0300

Message
The system board arg1 current is less than the lower warning threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0301

Message
The system board arg1 current is less than the lower critical threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System board <name> current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0302

Message
The system board arg1 current is greater than the upper warning threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0303

Message
The system board arg1 current is greater than the upper critical threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System board <name> current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0304

Message
The system board arg1 current is outside of range.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System board <name> current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0305

Message
The system board arg1 current is within range.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0306

Message
Disk drive bay arg1 current is less than the lower warning threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0307

Message
Disk drive bay arg1 current is less than the lower critical threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
Disk drive bay <name> current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0308

Message
Disk drive bay arg1 current is greater than the upper warning threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0309

Message
Disk drive bay arg1 current is greater than the upper critical threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
Disk drive bay <name> current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0310

Message
Disk drive bay arg1 current is outside of range.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
Disk drive bay <name> current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0311

Message
Disk drive bay arg1 current is within range.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0312

Message
System level current is less than the lower warning threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0313

Message
System level current is less than the lower critical threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System level current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0314

Message
System level current is greater than the upper warning threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0315

Message
System level current is greater than the upper critical threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System level current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0316

Message
System level current is outside of range.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System level current is outside of range. Contact Support
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0317

Message
System level current is within range.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

AMP0318

Message
Chassis power level current is less than the lower warning threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0319

Message
Chassis power level current is less than the lower critical threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0320

Message
Chassis power level current is greater than the upper warning threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0321

Message
Chassis power level current is greater than the upper critical threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0322

Message
Chassis power level current is outside of range.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0323

Message
Chassis power level current is within range.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔ ✔ ✔    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP400

Message
The arg1 sensor has failed, and the last recorded value by the sensor was arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message has failed. This condition can cause system performance issues and degradation in the moitoring capability of the system.
Recommended Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
OMSA Event ID
5200
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔*        
CMC              

AMP401

Message
Unable to read the arg1 sensor value.
Arguments
arg1 = sensor name
Detailed Description
The current sensor identified in the message has failed. This condition can cause system performance issues and degradation in the moitoring capability of the system.
Recommended Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
OMSA Event ID
5201
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔*        
CMC              

AMP402

Message
The arg1 sensor returned to a normal state with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message has returned to a normal state.
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
OMSA Event ID
5202
OMSA Trap ID
5202
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC     ✔*   ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔*        
CMC              

AMP403

Message
The arg1 sensor state has changed to a warning state with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message is faulty or the current drawn by the system exceeds the warning threshold. This condition can cause system performance issues and degradation in the moitoring capability of the system.
Recommended Response Action
Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider. Otherwise, change the warning threshold for the current sensor such that it corresponds to the hardware configuration.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
OMSA Event ID
5203
OMSA Trap ID
5203
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC     ✔*   ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔*        
CMC              

AMP404

Message
The arg1 sensor detected an error with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message is faulty or the current drawn by the system exceed the critical threshold. This condition can cause system performance issues and degradation in the moitoring capability of the system.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
OMSA Event ID
5204
OMSA Trap ID
5204
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC     ✔*   ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔*        
CMC              

AMP405

Message
The arg1 sensor state has changed to a failed state with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message may be faulty. This condition can cause system performance issues and degradation in the moitoring capability of the system.
Recommended Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a faulty sensor, replace the system board. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
OMSA Event ID
5205
OMSA Trap ID
5205
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC     ✔*   ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔*        
CMC              

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\