Preskočiť na hlavný obsah
  • Zadávajte objednávky rýchlo a jednoducho
  • Pozrite si svoje objednávky a sledujte priebeh doručenia
  • Vytvorte si zoznam svojich produktov a majte ho vždy poruke

Latitude 5440 Owner's Manual

Removing the memory module

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the nanoSIM card.
  3. Remove the base cover.

About this task

The following image(s) indicate the location of the memory module and provide a visual representation of the removal procedure.

Figure 1. Removing the memory module
Image: Removing the memory module

Steps

  1. Using your fingertips, spread apart the securing clips on the memory-module slot until the memory module pops up.
  2. Slide and remove the memory module from the memory-module slot on the system board.
    NOTE:Repeat step 1 and step 2 if there is more than one memory module installed on your computer.
    CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or metallic contacts on the memory module as electrostatic discharge (ESD) can inflict severe damage on the components. To read more about ESD protection, see ESD protection.

Ohodnotiť tento obsah

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
0/3000 characters
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, či vám článok pomohol alebo nie.
  Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\