The following table lists the power adapter specifications of your
Latitude 5440.
Table 1. Power adapter specificationsµ
The following table provides the detailed power adapter specifications of
Latitude 5440.
Description
Option one
Option two
Option three
Option four
Type
60 W adapter, USB-C
60 W adapter, USB-C, 2-pin
65 W adapter, USB-C
100 W adapter, USB-C
Power-adapter dimensions:
Height
22 mm (0.86 in.)
22 mm (0.86 in.)
28 mm (1.10 in.)
26.50 (1.04 in.)
Width
55 mm (2.16 in.)
55 mm (2.16 in.)
51 mm (2.01 in.)
60 mm (2.36 in.)
Depth
66 mm (2.59 in.)
66 mm (2.59 in.)
112 mm (4.41 in.)
122 mm (4.80 in.)
Input voltage
100 VAC–240 VAC
100 VAC–240 VAC
100 VAC–240 VAC
100 VAC–240 VAC
Input frequency
50 Hz–60 Hz
50 Hz–60 Hz
50 Hz–60 Hz
50 Hz–60 Hz
Input current (maximum)
1.70 A
1.70 A
1.70 A
1.70 A
Output current (continuous)
20 V/3 A (continuous)
15 V/3 A (continuous)
9 V/3 A (continuous)
5 V/3 A (continuous)
20 V/3 A (continuous)
15 V/3 A (continuous)
9 V/3 A (continuous)
5 V/3 A (continuous)
20 V/3.25 A (continuous)
15 V/3 A (continuous)
9 V/3 A (continuous)
5 V/3 A (continuous)
20 V/5 A (continuous)
15 V/3 A (continuous)
9 V/3 A (continuous)
5 V/3 A (continuous)
Rated output voltage
20 VDC
15 VDC
9 VDC
5 VDC
20 VDC
15 VDC
9 VDC
5 VDC
20 VDC
15 VDC
9 VDC
5 VDC
20 VDC
15 VDC
9 VDC
5 VDC
Temperature range:
Operating
0°C to 40°C (32°F to 104°F)
0°C to 40°C (32°F to 104°F)
0°C to 40°C (32°F to 104°F)
0°C to 40°C (32°F to 104°F)
Storage
-20°C to 70°C (-4°F to 158°F)
-40°C to 70°C (-40°F to 158°F)
-40°C to 70°C (-40°F to 158°F)
-40°C to 70°C (-40°F to 158°F)
CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.
Údaje k tejto téme nie sú k dispozícii.
Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
Vyberte, prosím, či vám článok pomohol alebo nie.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\