Pular para o conteúdo principal
Sair

Boas-vindas à Dell

Minha conta
  • Faça pedidos de forma rápida e simples
  • Visualize os pedidos e acompanhe o status de envio
  • Crie e acesse uma lista dos seus produtos
Login Crie sua conta Premier login Inscrição no programa de parceria
Fale Conosco

Seus carrinhos no Dell.com

Dell PowerEdge R520 Owner's Manual

PDF

Removing The Power-Distribution And Power-Interposer Boards

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals
  2. Disconnect the power cable from the power source and the power supply you intend to remove, and remove the cables from the strap.
  3. Open the system.
  4. Disconnect all the power cables from the power supply to the system board, hard drives, and optical drive.
    • CAUTION: The power-distribution and the power-interposer board assembly must be removed from the system before separating them to avoid damaging the power-distribution board's bottom layout.
  5. Remove the screws securing the power-distribution board to the chassis.
  6. Keeping the release tab pressed, slide the power-interposer and power-distribution board assembly up and toward the cooling fan, and lift it out of the system.
  7. Pull the power-distribution board out from the power-distribution board connector on the power-interposed board.
    Figure 1. Removing and Installing the Power-Distribution Board The figure shows removing and installing the power-distribution board.
    1. power-distribution board
    2. fan 6 cable connector
    3. screws (4)
    4. power-interposer board
    5. release tab
    6. power-distribution board connector
    Figure 2. Power-Distribution Board Connectors The figure shows connectors on the power-distribution board.
    1. fan 6 cable connector
    2. power-distribution board connector
    3. 8-pin power connector
    Figure 3. Power-Interposer Board Connectors The figure shows connectors on the power-interposer board.
    1. 8-pin power connector
    2. retaining slots (4)
    3. power-distribution board connector

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\