Pular para o conteúdo principal
Sair

Boas-vindas à Dell

Minha conta
  • Faça pedidos de forma rápida e simples
  • Visualize os pedidos e acompanhe o status de envio
  • Crie e acesse uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Login Crie sua conta Premier login Inscrição no programa de parceria
Fale Conosco

Seus carrinhos no Dell.com

Dell PowerEdge R520 Owner's Manual

PDF

Back-Panel Features And Indicators

Figure 1. Back-Panel Features and Indicators—Redundant Power Supply Unit Chassis The figure shows back panel features of a redundant power supply unit system.
Figure 2. Back-Panel Features and Indicators—Non-Redundant Power Supply Unit Chassis The figure shows back panel features of a non-redundant power supply unit system.
ItemIndicator, Button, or ConnectorIconDescription
1PCIe expansion card slot 1 Connects a PCI Express expansion card.
2vFlash media card slot (Optional)vFlash media card slot iconAllows you to insert a vFlash media card.
3iDRAC port (Optional) Dedicated management port for the iDRAC Ports Card.
4PCIe expansion card slots (3) Connects a PCI Express expansion card.
5Serial connectorserial connector iconConnects a serial device to the system.
6Video connectorvideo connector iconConnects a VGA display to the system.
7Ethernet connectors (2)ethernet connector icon

Integrated 10/100/1000 Mbps NIC connector

Integrated 100 Mbps/1 Gbps/10 Gbps SFP+ connector

8USB connectors (2)USB connector iconConnect USB devices to the system. The ports are USB 2.0-compliant.
9System identification connector Connects the optional system status indicator assembly through the optional cable management arm.
10System identification buttonsystem identification iconThe identification buttons on the front and back panels can be used to locate a particular system within a rack. When one of these buttons is pushed, the LCD panel on the front and the system status indicator on the back blink until one of the buttons is pushed again.

Press to toggle the system ID on and off. If the system hangs during POST, press and hold the system ID button for more than five seconds to enter BIOS progress mode.

To reset the iDRAC (if not disabled in System Setup) press and hold for more than 15 seconds.

11Power supply 
AC
495 W, 750 W, 1100 W or 550 W (non-redundant),
Or
DC
750 W or 1100 W

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\