Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

setflexaddr

Table 1. Details of setflexaddr. The following table provides the details of setflexaddr attribute:
Description	Enables or disables FlexAddress on a particular slot or fabric. To use this subcommand, you must have the Chassis Configuration Administrator privilege. If the fabric type is determined to be Infiniband, the operation is canceled and the command returns an error. If the FlexAddress feature is not activated, the command returns an error. NOTE: The server must be turned off to change the slot state. All servers must be turned off to change the fabric state. The MAC/WWN addresses must be managed locally (not by an external console) to use this command.
Synopsis	racadm setflexaddr [-i < slot#> < state>][-f < fabricName> < state>] < slot# > = 1 to 4 < fabricName > = A1 or A2 < state > = 0 or 1 where 0 is disable and 1 is enable.
Input	-i < slot#> < state> — Enables or disables FlexAddress for the specified slot. -f < fabricName> < state> — Enables or disables FlexAddress for the specified fabric.
Example	racadm setflexaddr -i 1 0 Slot 1 FlexAddress state set successfully racadm setflexaddr -f A 1 Fabric A FlexAddress state set successfully racadm setflexaddr -f idrac 1