Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

setassettag

Table 1. Details of setassettag. The following table provides the details of setassettag attribute:
Description	Sets the N-byte ASCII asset tag for the chassis. To use this subcommand, you must have the Administrator privilege. NOTE: The special characters " (double quote), ` (back quote), & (ampersand), and \ (backslash) are not supported for this subcommand.
Synopsis	racadm setassettag -m chassis < asset tag>
Input	-m < module > — Specifies the module whose asset tag you want to set. Legal value: chassis You can obtain the same output if you do not include this option, because there is only one legal value. < assettag > is a maximum of 64 non-extended ASCII characters.
Example	racadm setassettag -m chassis 783839–33 racadm setassettag 783839–33 The asset tag was changed successfully.