Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

remoteimage

Table 1. Details of remoteimage. The following table provides the details of remoteimage attribute:
Description	Connects, disconnects, or deploys a media file on a remote server. To use this subcommand, you must have the Administrator permission.
Synopsis	racadm remoteimage [-m <module> \| -a] racadm remoteimage -d -m <module> racadm remoteimage -d -a racadm remoteimage -s [-m <module> \| -a] racadm remoteimage -c -m <module> -u <username> -p <password> -l <image_path> racadm remoteimage -c -a -u <username> -p <password> -l <image_path> racadm remoteimage -e -m module -u <username> -p <password> -l <image_path> racadm remoteimage -e -a -u <username> -p <password> -l <image_path>
Input	`-c` — Connect a remote image. `-d` — Disconnect the remote image. `-e` — Deploys a remote image `-s` — Display the connection status; –a is assumed, if not specified. `-m` < module> — The `<module>` option can have the following values: `server-<n>`, where n=1–4 `server-<nx>`, where n=1–4 and x=a-d (lower case) `-u` — Username to access the network share. `-p` — Password to access the network share. `-l` — Image location on the network share; use double quotation marks with a location. NOTE: The `-u`, `-p`, and `-l` options are applicable only to connect and deploy actions.
Example	racadm remoteimage -c -u "user" -p "pass" -l //shrloc/foo.iso Remote Image is now Configured. racadm remoteimage -d Disable Remote File Started. Please check status using -s option to verify if the Remote File Share is ENABLED or DISABLED. racadm remoteimage -s Remote File Share is Enabled. UserName Password ShareName //192.168.0.1/xxxx/dtk_3.3_73_Linux.iso