Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

racreset

Table 1. Details of racreset. The following table provides the details of racreset attribute:
Description	Performs a CMC or a RAC reset operation. NOTE: To use this subcommand, you must have the Chassis Administrator privilege. NOTE: When you run a racreset subcommand, CMC may require up to two minutes to return to a usable state.
Synopsis	racadm racreset [-m < module>]
Input	`-m`< module> — This option can have one of the following values: `server <-n>`, where n= 1–4 `server <-nx>`, where n=1–4 and x=a-d (lower case) `sled- n`, where n=1–4 NOTE: The `-m sled-n` option is available only for multinode servers. NOTE: You can use the `-f` option to force the reset. This option is available only with the `-m` option. NOTE: You can specify multiple modules: - `m <module 1>` `–m <module 2>`.
Example	Reset CMC: racadm racreset Reset server 1. racadm racreset -m server-1 Reset servers 1 and 3. racadm racreset -m server-1 -m server-3 Racreset on multinode server racadm racreset -m sled-1 Force racreset on multinode server racadm racreset -m sled-1 -f