Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

chassisaction

Table 1. Details of chassisaction . The following table provides the details of chassisaction attribute:
Description	Runs a power action on the chassis or a switch. To use this subcommand, you must have the Chassis Control Administrator privilege.
Synopsis	racadm chassisaction [-m < module>] < action>
Input	-m < module> — Module on which you want to carry out the action. Values are: chassis — this is the default value, if -m is not specified. switch-n, where n=1 to 2 < action> — Action that you want to run on the specified module. Values are: powerdown — (Chassis only) Turns off the chassis. powerup — (Chassis only) Turns on the chassis. powercycle — Power cycles the module. nongraceshutdown — (Chassis only) Non-gracefully turns off the chassis. reset — Performs a hard reset of the module. When < module > = switch, < action > must be powercycle or reset.
Output	None
Example	Perform a reset of switch-1: racadm chassisaction -m switch-1 reset Module power operation successful.