Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów

Latitude 7290 Owner's Manual

Installing keyboard assembly

NOTE The keyboard and the keyboard tray together are called the keyboard assembly.
NOTE The keyboard has multiple snap points on the lattice side which must be pushed down firmly at the snap points in order to secure and fit it to the replacement keyboard.
  1. Align the keyboard assembly with the screw holders on the computer.
  2. Tighten the M2.0 x 2.5 screws that secure the keyboard to the chassis.
  3. Connect the keyboard cable, USH board cable(optional), keyboard backlight cable, and touchpad cable cable to the connectors on the touchpad buttons board.
  4. Install the:
    1. system board
    2. heat sink
    3. WLAN card
    4. WWAN card
    5. PCIe SSD card
    6. memory module
    7. battery
    8. base cover
  5. Follow the procedure in After working inside your computer.

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\