1 |
Client identifier |
Always sent. |
2 |
Time Offset |
Optional. |
3 |
Router |
Optional but recommended. It is
not required unless the thin client must interact with servers on
a different subnet.
|
6 |
Domain Name Server (DNS) |
Optional but recommended. |
12 |
Host Name/Terminal Name |
Optional string. The host name
or terminal name to be set.
|
15 |
Domain Name |
Optional but recommended. See Option 6. |
28 |
Broadcast Address |
Optional. |
44 |
WINS servers IP Address |
Optional. |
51 |
Lease Time |
Optional but recommended. |
52 |
Option Overload |
Optional. |
53 |
DHCP Message Type |
Recommended. |
54 |
DHCP Server IP Address |
Recommended. |
55 |
Parameter Request List |
Sent by appliance. |
57 |
Maximum DHCP Message Size |
Optional — always sent by thin client. |
58 |
T1 (renew) Time |
Optional but recommended. |
59 |
T2 (rebind) Time |
Optional but recommended. |
61 |
Client identifier |
Always sent. |
161 |
Server (ftp/http/https) |
Optional string. If this is an
IP address or resolvable host name, the protocol is assumed to be
FTP; however, it may be the leading portion of a URL that specifies
another protocol. If using the URL form, it should not include a trailing
slash, for example, http://server.example.com or ftp://192.168.0.1.
|
162 |
Root path to the server (ftp/
http/https)
|
Optional string. The relative
directory starting from the root directory must be given. For example,
on an FTP server, the full directory may be
C:/Inetpub/ftproot/wyse, where wyse is the directory that contains the firmware. In this
example, the correct string value for this DHCP option is
/wyse.
On a Linux server, an FTP user-based
directory might be
/home/test/wyse. In this example,
if the FTP user is test, then the FTP root path is
/wyseand not the full path (/home/test/wyse). This value should use URL
path notation.
-
NOTE: URL path notation-Start with a forward slash, /, and use a forward
slash as folder separators.
|
165 |
CCM server |
Recommended. |
166 |
MQTT server |
Recommended. |
181 |
Citrix Server FQDN/IP |
Optional string. IP address or FQDN of the Citrix
Server which will be used by Citrix PAM Login and Desktop Appliance
Mode.
|
182 |
Wyse Admin List |
Optional string. DHCP equivalent
of the DomainList ini file parameter.
|
184 |
Server Username |
Optional string. Username to use
when authenticating to the server specified in Option.
|
185 |
Server Password |
Optional string. Password to use
when authenticating to the server specified in Option.
|
186 |
WDM IP Address |
Optional binary IP address of the
WDM server. This option can specify up to one WDM server.
|
191 |
XenDesktop DDC URL |
Optional string. For more information. |
194 |
WDM FQDN |
Optional FQDN of the WDM server.
This option can specify up to one WDM server.
|
199 |
CCM Group Token |
Recommended. |
203 |
Type of VDI theme |
Type of VDI theme used by Desktop Appliance mode.
The possible values are Citrix/none. None will disable Desktop Appliance
mode.
|
204 |
Type of Citrix server |
pnagent/storefront |
205 |
Citrix server storename |
Optional, storename configured on Citrix server.
Applicable only for Citrix storefront server.
|