Ga naar hoofdinhoud
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.

Dell Precision Tower 5810 Owner's Manual

Removing the Slim Line Optical Drive

  1. Follow the procedures in Before Working Inside Your Computer.
  2. Remove the computer cover.
  3. Disconnect the data and power cables from the optical drive.
    Figure displaying disconnection of the data and power cables from the optical drive.
  4. Unthread the cables from the latches.
    Figure displaying the unthreading of the cables from the latch.
  5. Press on the clasp to release the latch holding the cables on the side of the optical-drive cage.
    Figure displaying the releasing of the latch holding the cables.
  6. Lift up the cables.
    Figure displaying the removal of the cables.
  7. Lift the release latch on top of the optical-drive cage.
    Figure displaying the lifting up of the release latch.
  8. Holding the release latch, slide the optical-drive cage from the optical-drive compartment.
    Figure displaying the removal of the optical drive cage.
  9. Remove the screws that secure the optical drive to the optical-drive cage.
    Figure displaying the removal of the screws that secure optical drive to the optical drive cage.
  10. Remove the screws that secure the optical drive to the optical-drive cage.
    Figure displaying the removal of the screws that secure optical drive to the optical drive cage.
  11. Remove the optical drive from the optical-drive cage.
    Figure displaying the removal of optical drive from the optical-drive cage.

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \